1. Overview of Mining Equipment Wet Magnetic Separator
• The wet magnetic separator is a device designed to assist in the purification and separation of process streams. It is commonly used in mining industries and smaller versions are also utilized in scientific labs for processing certain types of samples. This machine can separate raw materials with different magnetic properties by utilizing both magnetic and mechanical forces.
• The magnetic separator is applied in the tailing discarding or purification process of fine-grained weak-magnetic minerals such as limonite, hematite, manganese ore, titanium ore, etc., or in the deironing processing of non-metallic minerals like andalusite, sillimanite, kyanite, garnet, feldspar, quartz, zircon, corundum, diamond, etc. It is also effective in eliminating weak magnetic harmful impurities from other materials.
2. Characteristics of Mining Equipment Wet Magnetic Separator
The magnetic system is made of high-quality ferrite materials or composite rare earth magnets, with an average magnetic induction of up to 800-4000mT on the previous drum table. Some models feature roll-shaped separators with magnetic strength reaching up to 8000mT, which is the highest magnetic field strength globally.
3. Working Principle of Mining Equipment Wet Magnetic Separator
• The pulp flows into the cell body from the pulp box, and under the water flow from the feeding spray pipe, the mineral grains enter the feeding area of the cell body in a loose condition.
• In the magnetic field, magnetic ore particles gather and form magnet groups or chains influenced by the magnetic force within the pulp. These particles move toward the magnetic pole and are finally absorbed onto the cylinder.
Technical Parameters:
| Model | Shell diameter | Shell length | Shell rotation speed | Feeding size | Processing capacity | Power |
| (mm) | (mm) | (r/min) | (mm) | (t/h) | (kw) | |
| CTB6012 | 600 | 1200 | 35 | 2-0 | 10-20 | 1.5 |
| CTB6018 | 600 | 1800 | 35 | 2-0 | 15-30 | 2.2 |
| CTB7518 | 750 | 1800 | 35 | 2-0 | 20-45 | 2.2 |
| CTB9018 | 900 | 1800 | 35 | 3-0 | 40-60 | 3 |
| CTB9021 | 900 | 2100 | 35 | 3-0 | 45-60 | 3 |
| CTB9024 | 900 | 2400 | 28 | 3-0 | 45-70 | 4 |
| CTB1018 | 1050 | 1800 | 20 | 3-0 | 50-75 | 5.5 |
| CTB1021 | 1050 | 2100 | 20 | 3-0 | 50-100 | 5.5 |
| CTB1024 | 1050 | 2400 | 20 | 3-0 | 60-120 | 5.5 |
| CTB1218 | 1200 | 1800 | 18 | 3-0 | 80-140 | 5.5 |
| CTB1224 | 1200 | 2400 | 18 | 3-0 | 85-180 | 7.5 |
| CTB1230 | 1200 | 3000 | 18 | 3-0 | 100-180 | 7.5 |
| CTB1530 | 1500 | 3000 | 14 | 3-0 | 170-280 | 11 |
Â
Ф160mm Finger Joint Cutters
SICHUAN TELOS NEW MATERIAL TECHNOLOGY CO., LTD , https://www.kenlarcutters.com