In recent days, heavy rains have occurred in most parts of the country. Some areas have even experienced severe flooding, which has caused many vehicles to have been flooded. Of course, even if it is a high-altitude truck, it cannot be spared. Then how do we solve the related problems after the high-altitude vehicle enters the water?
1. When high-altitude vehicles are involved in the wading process, there is a situation where the water is turned off and the water is turned off. The ignition switch should be turned off immediately. Never start the engine again. In the event of an opportunity, the vehicle can be parked in a front high and low position, so that the water entering the exhaust pipe can flow out and damage to the three-way catalytic converter and the muffler can be avoided.
2. If someone in the snorkeling car enters the compartment in the wading water, then when the vehicle is being repaired and maintained, it is mainly necessary to dispose of the stagnant water of the heavy truck. There are several underneath the chassis of the aerial working vehicle. After the sealer is blocked, open it and release the water in the compartment. However, because some of the materials decorated in the car have relatively strong water-absorbing properties, they should be dismantled. Place in a more spacious place, so that its moisture can be well evaporated. Then the air-conditioner of the aerial work vehicle was opened, and the circulation switch of the vehicle was adjusted to the inner circulation, so that the water vapor in the carriage could be discharged outside the vehicle through the air-conditioning system.
3, if the parts of the chassis of the aerial work vehicle after wading, it is relatively easy to lead to deterioration of the lubricant. In particular, some system performance aspects such as transmission, steering, etc. are involved. It is necessary to replenish the grease on the parts of the chassis of the aerial working platform after the wading, and it is also necessary to carefully listen to the chassis to see if there is any unusual ringing during the trial run.
An anchorage frame secures the Tower Crane mast to a structure or framework and provides stability when the tower crane is under load or experiencing wind forces. The number of Tower Crane Anchorage Frame is calculated by taking into account such factors as the type of tower cranes, jib length, height under hook, and maximum out-of-service wind speed.
Jacking Part Anchorage Frame,Tower Crane Anchorage Frame,Mast Section Anchorage Frame,Anchorage Frame For Tower Crane,Tower Crane Anchor
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com