With the development of modernization, people are paying more and more attention to environmental sanitation. The demand for garbage trucks is increasing, and people's transportation and handling of domestic garbage have been well developed. Hubei Cheng Li designed different types of garbage trucks for different fee requirements, including compact garbage trucks, sealed garbage trucks, hook-arm garbage trucks, swing arm garbage trucks, docking garbage trucks, and hanging garbage trucks. Etc. Among them, the hook arm type garbage truck is the best model for sales of Hubei Cheng Li. Its characteristics of ease of use, simple operation, and the ability to fit more than one bucket are widely applicable to the disposal of city streets and school rubbish, especially for When collecting and transporting residential garbage, we will certainly encounter some problems caused by improper operation. Here I will explain to you the main issues of the use of hook-arm garbage trucks.
1. The weight of the rubbish inside the garbage compartment should not exceed the allowable range of the car. Otherwise, it will cause excessive pressure during the binning, hydraulic components will be damaged, light oil will cause oil leakage, and the clutch wheel will slip, causing serious clutch burn-up. .
2. Before packing, ensure that the longitudinal beams of the car body are located between the rollers of the rear end of the auxiliary beam to ensure that the longitudinal central axis of the car coincides with the longitudinal central axis of the car body. Otherwise, the position of the vehicle should be adjusted.
3, in the packing work, according to the weight of garbage collected in the compartment to properly increase the throttle, while the garbage can be successfully picked up to achieve packing.
4, in the end of the operation, should promptly close the electromagnetic clutch switch to ensure that the electromagnetic clutch is in the power-off state, in particular to remind the car is in the flameout, but also to the electromagnetic clutch in the power-off state, otherwise it will cause a large battery power consumption , resulting in loss of electricity so that the car can not start properly.
5. Under normal circumstances, do not adjust the pressure of the regulator. This has been adjusted before leaving the car.
More vehicle details, please click Hubei Cheng Li Special Automobile Co., Ltd. official sales website: http://, Hubei Cheng Li national free car hotline, Hubei Cheng Li, really good car, good brand, good quality.
Fiber Laser Marking Machine is a new generation of laser marking system developed by our company using the advanced laser technology. This laser engraving machine uses the fiber laser to output laser, and then the marking function is realized by the high-speed scanning galvanometer system. The optical conversion efficiency of fiber laser marking is high, reaching more than 30%. Metal Laser Engraving Machines is air cooling, the whole machine is small in size, the output beam quality is good, and the reliability is high.
The structure of it is simplified, easy to control.
The optical system adopts a fully sealed structure with a red light preview function, which has a more beautiful appearance and more convenient operation;
High photoelectric conversion efficiency, high beam quality, fine lines and small spots;
It adopts air-cooling method for cooling, which has low energy consumption.
Fibre Laser Engraving Machine,Laser Engraving Machine Stainless Steel,Metal Laser Engraving Machines ,Laser Engraving Cutting Machine
Ande Laser Intelligent Equipment (Guangdong) Co., Ltd. , https://www.andelaser.com