**Glazed Tile Forming Machine**
**1. Main Technical Parameters of Mechanical Parts:** 1) Forming method: Sequential and synchronous deformation mode (the middle of the stiffener is formed first, forcing the release to both sides to ensure the shape of the plate after forming). 2) Molding number: 16 3) Forming roll bar material: Forged 45# steel 4) Forming roller mold: CNC finishing process 5) Roller surface hardened (single-sided): 0.05 mm 6) Forming spindle diameter: Ф75mm, solid shaft made of 40R steel, quenched and heat-treated 7) Main motor power: 50HZ / 380V / 7.5KW 8) Hydraulic station motor power: 50HZ / 380V / 3KW 9) Forming scissors blade material: Cr12 die steel, heat-treated, hardness HRC 60°–62° (Wuxi South heat treatment process) 10) Mold system thickness: 0.4–0.5mm 11) Molding speed: 5 m/min 12) Board type: Waterproof performance is good, flat board with no abrasion. The specific size conforms to GB/T 12755-91 used in the international construction industry. **2. Equipment and Electrical Control System Process:** 1) Product length measurement: 2500 rotary encoder pulse tracking scale, error within ±1mm for 10m 2) Control system inverter: 7.5KW Huichuan control series, safe, stable, and reliable performance 3) Control system programming: Industrial computer using German Siemens PLC programming system 4) Operator panel: Man-machine interface touch-screen, robot dynamic equipment simulation, and process monitoring **3. Complete Process Flow Chart of the Equipment:** 10T Passive Unwinding Feeding --- Feeding --- Sequential Roll Forming --- PLC Computerized Cutting --- Hydraulic Mold Auto Cutting --- Finished Material Discharging **4. Characteristics of the Full Set of Equipment:** **4.1 10T Passive Decoiler** 1) The 10T passive uncoiler uses a cantilevered umbrella-type material rack, adjustable via screw tightening, suitable for different sizes of color coil volume, convenient for loading. 2) The decoiler is passive, and its linear speed changes according to the host machine. **4.2 Molding Process Characteristics of the Main Frame** 1) The main frame is made of 36# GB hot-rolled I-beam, fully welded, stress relieved by shot blasting and vibration methods, and finished with a gantry mill. Wall plates and racks are connected via screws to reduce rack deformation, ensuring horizontal and vertical cross-frame alignment and extending equipment service life. 2) All spindles use high-quality 40R steel, quenched and tempered, CNC-finished for excellent overall performance. 3) Rolls are made of high-quality 45# forged steel, with a surface hard baked treatment for good dimensional accuracy and wear resistance. 4) The host uses a cycloid pin wheel deceleration mechanism, with chain transmission for each active roller, ensuring smooth and reliable operation. 5) The machine employs hydraulic molding technology, with hydraulic drive that ensures safe and reliable action, maintaining consistent effective width at both ends and the middle of the profile. 6) The cutting tool is made of Cr12 mold steel, heat-treated, with a hardness of HRC 60°–62°. **Contact Information:** Julia Yan / Lucy / Alice [M]: (+86) 18668118322 / (+86) 13646864706 / (+86) 15757832416 ----------------------------------------------------------------------------------- **LINAN XINRAN SOLAR EQUIPMENT CO., LTD** C301, No.68 Huaqiao Road, Jincheng Town, Lin'an, Hangzhou, Zhejiang Province, China [T]: (+86) 571 61072117 | [F]: (+86) 571 63711398 [W]: www.linanmachine.com This machine is ideal for producing high-quality glazed tiles with precision and efficiency. It's widely used in the construction industry due to its durability and advanced technical features. If you need more details or have any questions, feel free to contact us!
**1. Main Technical Parameters of Mechanical Parts:** 1) Forming method: Sequential and synchronous deformation mode (the middle of the stiffener is formed first, forcing the release to both sides to ensure the shape of the plate after forming). 2) Molding number: 16 3) Forming roll bar material: Forged 45# steel 4) Forming roller mold: CNC finishing process 5) Roller surface hardened (single-sided): 0.05 mm 6) Forming spindle diameter: Ф75mm, solid shaft made of 40R steel, quenched and heat-treated 7) Main motor power: 50HZ / 380V / 7.5KW 8) Hydraulic station motor power: 50HZ / 380V / 3KW 9) Forming scissors blade material: Cr12 die steel, heat-treated, hardness HRC 60°–62° (Wuxi South heat treatment process) 10) Mold system thickness: 0.4–0.5mm 11) Molding speed: 5 m/min 12) Board type: Waterproof performance is good, flat board with no abrasion. The specific size conforms to GB/T 12755-91 used in the international construction industry. **2. Equipment and Electrical Control System Process:** 1) Product length measurement: 2500 rotary encoder pulse tracking scale, error within ±1mm for 10m 2) Control system inverter: 7.5KW Huichuan control series, safe, stable, and reliable performance 3) Control system programming: Industrial computer using German Siemens PLC programming system 4) Operator panel: Man-machine interface touch-screen, robot dynamic equipment simulation, and process monitoring **3. Complete Process Flow Chart of the Equipment:** 10T Passive Unwinding Feeding --- Feeding --- Sequential Roll Forming --- PLC Computerized Cutting --- Hydraulic Mold Auto Cutting --- Finished Material Discharging **4. Characteristics of the Full Set of Equipment:** **4.1 10T Passive Decoiler** 1) The 10T passive uncoiler uses a cantilevered umbrella-type material rack, adjustable via screw tightening, suitable for different sizes of color coil volume, convenient for loading. 2) The decoiler is passive, and its linear speed changes according to the host machine. **4.2 Molding Process Characteristics of the Main Frame** 1) The main frame is made of 36# GB hot-rolled I-beam, fully welded, stress relieved by shot blasting and vibration methods, and finished with a gantry mill. Wall plates and racks are connected via screws to reduce rack deformation, ensuring horizontal and vertical cross-frame alignment and extending equipment service life. 2) All spindles use high-quality 40R steel, quenched and tempered, CNC-finished for excellent overall performance. 3) Rolls are made of high-quality 45# forged steel, with a surface hard baked treatment for good dimensional accuracy and wear resistance. 4) The host uses a cycloid pin wheel deceleration mechanism, with chain transmission for each active roller, ensuring smooth and reliable operation. 5) The machine employs hydraulic molding technology, with hydraulic drive that ensures safe and reliable action, maintaining consistent effective width at both ends and the middle of the profile. 6) The cutting tool is made of Cr12 mold steel, heat-treated, with a hardness of HRC 60°–62°. **Contact Information:** Julia Yan / Lucy / Alice [M]: (+86) 18668118322 / (+86) 13646864706 / (+86) 15757832416 ----------------------------------------------------------------------------------- **LINAN XINRAN SOLAR EQUIPMENT CO., LTD** C301, No.68 Huaqiao Road, Jincheng Town, Lin'an, Hangzhou, Zhejiang Province, China [T]: (+86) 571 61072117 | [F]: (+86) 571 63711398 [W]: www.linanmachine.com This machine is ideal for producing high-quality glazed tiles with precision and efficiency. It's widely used in the construction industry due to its durability and advanced technical features. If you need more details or have any questions, feel free to contact us!
Aluminum jar, Aluminum can, Aluminum container, Aluminum tin
Zhoushan Xinmei Packaging Products Co., Ltd , https://www.xinmeipackage.com