[China Instrument Network Industry Focus] On May 18, the Anhui Provincial Bureau of Quality Supervision notified the 2014 provincial measurement supervision and inspection. Among them, the qualified rate of the cold water meter is 100%, the qualified rate of measurement is 99.4%, and the qualified rate of the gas meter is 99.41%.
In 2014, Anhui Quality Supervision Bureau inspected the water meter and the first inspection qualified water meter in the province. The inspection items were divided into measurement and quality. The qualification rates were 99.4% and 100% respectively. The passing rate of metrological verification was the same as in 2013. The quality inspection pass rate increased by 6.1 percentage points.
In 2014, the Anhui Provincial Bureau of Quality Supervision first conducted metrological inspections and inspections of gas meters and energy meters used throughout the province.
Among them, a total of 680 gas meters were surveyed and selected for inspection. After the first inspection, 562 new meters were to be installed, and 118 were used. A total of 4 were unqualified. All of them were in-use gas meters, and the overall qualification rate was 99.41%. Among the 4 unqualified products, 3 were unqualified for indicating error items and 1 was unqualified for sealing. The qualified rate of spot checks in 13 prefectures and 2 provinces and counties is 100%, and the qualification rate in Chizhou, Suzhou and Huainan is 95.0%. The qualified rate of the gas meter has been checked for the first time and the qualified rate of the gas meter in use is 96.61%.
Your own water meter is not allowed to run? We mainly look to see if there is a first check list and whether the seals are intact. According to the national regulations, the verification period of the water meter is 6 years. After the expiration, the rotation will be carried out. However, the verification period is different for different types of electricity meters. In general, the cycle is 10 years. For electronic meters, the cycle is generally 5 years. Even the long-lived table cycle may not be rotated until 15 years. The older the service life is, the more likely it is that the hydropower meter is not easy to run? Experts said that hydrometers that pass inspections are generally not prone to problems, and that, theoretically, any meter will go slower and slower.
In 2014, the Anhui Provincial Bureau of Quality Supervision first conducted metrological inspections and inspections of gas meters and energy meters used throughout the province.
Among them, a total of 680 gas meters were surveyed and selected for inspection. After the first inspection, 562 new meters were to be installed, and 118 were used. A total of 4 were unqualified. All of them were in-use gas meters, and the overall qualification rate was 99.41%. Among the 4 unqualified products, 3 were unqualified for indicating error items and 1 was unqualified for sealing. The qualified rate of spot checks in 13 prefectures and 2 provinces and counties is 100%, and the qualification rate in Chizhou, Suzhou and Huainan is 95.0%. The qualified rate of the gas meter has been checked for the first time and the qualified rate of the gas meter in use is 96.61%.
Your own water meter is not allowed to run? We mainly look to see if there is a first check list and whether the seals are intact. According to the national regulations, the verification period of the water meter is 6 years. After the expiration, the rotation will be carried out. However, the verification period is different for different types of electricity meters. In general, the cycle is 10 years. For electronic meters, the cycle is generally 5 years. Even the long-lived table cycle may not be rotated until 15 years. The older the service life is, the more likely it is that the hydropower meter is not easy to run? Experts said that hydrometers that pass inspections are generally not prone to problems, and that, theoretically, any meter will go slower and slower.
As an amorphous resin, it has a good dimensional accuracy when forming and is not significantly changed by external deformation. Therefore, it performs well in dimensional accuracy and stability and is suitable for precision forming.
Industry application
1.Smart card industry
2.Digital printing industry
3.Optical film industry
4.The car industry
advertising Film,,Screen printing film,Advertising inkjet film,Water-based Reverse Print Backlit Film
Guangzhou Quanxu Technology Co Ltd , https://www.skychema.com