How to properly maintain ultrasonic flowmeter

The ultrasonic flowmeter used in the measurement of the flow of various places and areas in the process have been used, how to carry out maintenance and maintenance? How can we extend the life of the measures? The following with the Instrument World Network, a brief introduction about the use of The maintenance problem, I hope to help you.

To verify verification in time

For users who install a large number of fixed ultrasonic flowmeters on site and have a wide range of users, they can be equipped with a portable ultrasonic flowmeter of the same type to be used in nuclear school field instrumentation. One is to adhere to one school and one school. That is, each new ultrasonic flowmeter is to be calibrated at the time of installation and commissioning to ensure good location, good installation, and accurate measurement. Second, when sudden changes occur in the flow rate of the ultrasonic flowmeter that is running online, Use a portable ultrasonic flow meter to perform a timely nuclear audit, find out the cause of sudden changes in flow, and find out whether the instrument has failed or if the flow does change. In this way, the use of the flowmeter can be monitored and problems can be detected and maintained.

To regularly maintain

Compared with other flowmeters, the maintenance of ultrasonic flowmeters is relatively small. If ultrasonic transducer is attached to the transducer, there is no loss of water pressure after installation, no potential leakage, just periodically check if the transducer is loose, and the adhesive between the pipeline is good; insert ultrasonic flowmeter , It is necessary to regularly clean the probes of impurities, scales and other leaks; integrated ultrasonic flowmeter, to check the flowmeter and the flange between the pipeline is good, and consider the site temperature and humidity of its electronic components ,wait. Regular maintenance can ensure long-term stable operation of ultrasonic flowmeters. Let's implement it now. The maintenance of instrumentation is a long-term process. Other instruments and instruments are the same.