High Quality 304 Stainless Materials Test Temperature Humidity Test Machine

Posted on

Model NO.: ZH-TH-225A
Humidity Range: 10%~98% Relative Humidity
Temperature Cooling Speed: 1degree ~ 20 Degree Per Min, Customized
Service: OEM / ODM / Non-Standard Available
Power Supply: AC220V/AC380V, Customized
Temperature Range: -70~150 Degree
Cooling System: Water Cooling / Air Cooling
Inner Material: SUS304 Stailess Steel
Heating Rate: 4 Degree/Min
Trademark: Sailham
Transport Package: Wooden Case
Specification: Customization available
Origin: Guangdong, China
HS Code: 8479899990
High Quality 304 Stainless Materials Temperature Humidity Test Machine/Chamber


Product Description
 Humidity and temperature tester are available as standard products in a variety of sizes to suit your needs. Our environmental test chambers are often used for steady-state stability testing, basic temperature cycling and accelerated stress testing. In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior workspace. 

 

Lowest temperature: -20 or -70°C (-4 or -100°F)
Highest temperature: 150°C (302°F)
Humidity range: 10 to 98% RH
Chamber size: 2.9 cubic feet
Touch-screen Watlow F4T programmer with Ethernet access


High Quality 304 Stainless Materials Test Temperature Humidity Test Machine



Technical parameters
Model ZH-HS-80(A~F) ZH-HS-150(A~F) ZH-HS-225(A~F) ZH-HS-408(A~F) ZH-HS-800(A~F) ZH-HS-1000
Inner size: WHD(cm) 40*50*40 50*60*50 60*75*50 60*85*80 100*100*80 100*100*100
External size: WHD(cm) 105*165*98 105*175*108 115*190*108 135*200*115 155*215*135 155*215*155
Temperature range (Low:A:+25ºC; B:0ºC;C:-20ºC; D:-40ºC;E:-60ºC;F:-70ºC) (High:+100ºC/+150ºC)
Humidity range 20%~98% R.H.(10%~98%R.H);(5%~98%R.His special optional condition)
Temp analytic accuracy/uniformity 0.1ºC/±2.0ºC
Temperature Fluctuation ±0.5ºC
Humidity analytic accuracy/ Humidity  control accuracy ±0.1%;±2.5%
Heat; cooling time Heat up about 4.0°C/min ;  Cooling about 1.0°C/min
Inner and outer materials SUS#304 Stainless steel for inner chamber ; Carton Advanced cold plate nano paint for outer
Insulation materials Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials
Cooling system Air cooling/single segment compressor(-40°C) ,air and water double segment compressor (-50°C~-70°C)
Protection devices Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch,super humidity over-temperature protection switch, fuse, failure warning system
Parts Watching window , 50mm testing hole , PL internal bulbs , Wet and dry bulb gauze , partition plate , castorx4,Foot Cupx4
Compressor Original France"Tecumseh"brand
Controller TEMI South Korea
Power AC220V 50/60Hz & 1, AC380V 50/60Hz 3
weight (kg) 150 220 270 320 450 580


 

Core accessories 

High Quality 304 Stainless Materials Test Temperature Humidity Test Machine


Manufacture process

High Quality 304 Stainless Materials Test Temperature Humidity Test Machine


Features
High performance and quiet operation (65 dBa)
Space-saving footprint, designed for flush installation to wall
Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone plug(special requirement)
Three levels of overheat protection, plus overcool protection
Easy lift-off service panels, electrical access on left
Detachable eight-foot power cord with plug
Direct water supply connection for continuous operation (supply tank optional)
ETL listed electrical panel conforming to UL 508A

 


Our Factory
High Quality 304 Stainless Materials Test Temperature Humidity Test Machine




Honorary Certifications:
High Quality 304 Stainless Materials Test Temperature Humidity Test Machine





Exhibitions and customers visit our factory

High Quality 304 Stainless Materials Test Temperature Humidity Test Machine





FAQ:

Q: What's the payment term?

A: T/T, L/C and other payment terms could be negotiated.

 

Q:Do you accept customization service?
A:Yes, of course, we can not only offer standard High and Low Temperature Alternating Damp Heat Testing Chamber, but also customized machines according to your request. Don't hesitate to tell us your requirement, we will try our best to meet your needs.

 

Q:How about your warranty?
A:Generally, our warranty is one year. Within the warranty period, we can offer technique support, Feedback to you within 24 hours and help you to repair your problem controller freely, even it's not from our factory 

 

Q:Can we visit your factory before order?
A:Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.

 

Q: What's the delivery term?
A:At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.

 

Q:How about the packing for machine, is it safely protected during transportation?
A: Testing Chamber is packed by standard export wooden box for outside package and stretch film for inner package, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage.




Contact US
Tel :+86-769-81105095    
Fax:+86-769-22400804
Website :www.sailham.com     
Company Address:1612 Huiyi Fortune Center Building, Intersection of Bulong Rd. and Longguan Rd., Longhua new district, Shenzhen, Guangdong, China
Factory    Address: NO.53,Jin Yuan Xin Road,Shi Long Keng,Liao Bu Town. Donggaun. Guangdong China (Mainland)

 

Plasma Cutting Machine


What are CNC Plasma Cutting Machines?


Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. Typical materials cut with a plasma torch include steel, Stainless steel, aluminum, brass and copper, although other conductive metals may be cut as well. Plasma cutting is often used in fabrication shops, automotive repair and restoration, industrial construction, and salvage and scrapping operations. Due to the high speed and precision cuts combined with low cost, plasma cutting sees widespread use from large-scale industrial CNC applications down to small hobbyist shops. CNC cutting machines, such as CNC plasma cutting machines, utilize their intricate software systems and components to efficiently, accurately and smoothly handle plasma cutting processes.


CNC Plasma Cutting vs. Other Cutting Methods:


Of course, plasma cutting is only one variety of system which CNC machines may be designed to work with. Another common variety is the CNC waterjet cutter. Waterjets can use either a mixture of pressurized water and abrasive, or purely water. One benefit to a waterjet cutter is that there`s no HAZ, or heat-affected zone, which can alter a material.
Another cutting method utilizing CNC machines is oxy-fuel, using fuel gases and oxygen, which dates back about 100 years. Here, a stream of oxygen is blasted onto a metal heated to kindling temperature, turning it into a flowing metal oxide.
With CNC plasma cutting machines, a plasma torch blows an inert gas at high speeds out of a nozzle, through an electrical arc, which turns some of that gas to plasma.

While all of these options remain widely used today, CNC plasma cutting machines are typically seen as a solution for manufacturers who are concerned with quickly and efficiently cutting conductive materials up to 3″ thick. The CNC plasma cutting process has superior cutting speeds, piercing speeds, and generates very precise cut qualities. More speed and higher quality also produces superior efficiency and productivity.


Cnc Plasma Cutting Machine applications:


It is widely used in the process of cutting metal plates in the machinery manufacturing industry, engineering industry and metal fabrication and can cut mild steel, stainless steel, aluminium, copper and many kinds of non-ferrous metal.
cnc plasma cutter

CNC plasma cutting machine features:


1.1300*2500mm standard working area(can tailore made for you)
2.START control system
3.Huayuan 120A plasma generator(Optional: Hypertherm power supply)
4.Cutting Material Collection Box with wheels,for easy take out products
5.High Quality cut performance,Fast cutting speed,high precision and low cost.
6.With firm and reasonable structure,the machine is easy to operate and durable for use.
7.The cutting incision is thin and tidily and can avoid the second processing.
8.High configurated CNC system,auto arc-striking and stable performance.   
9.Working with computer and support G code and files of  Uncannest software (specilized in cutting metal material) (optional Fastcam software)

10.It can cut metal plate of advertising 3D lighting letter and flute profile letter with high cutting precision.(USA power is optional)

plasma cutter


Effective Cutting Width (X axis)

1500mm optional

Effective Cutting Length (Y axis)

3000mm optional

Feature

Dustproof design and heavy duty frame

Drive Mode

Leadshine

Rail

Taiwan inported Hiwin Square rail

Lifting body

1set

Plasma torch

1set

File transmission

USB transmission

Cutting shape

Able to program and cut the steel plate parts with any plane shapes formed by straight lines and arcs;

Software

Fastcam Software

Plasma power source

Huayuan 63A 100A 120A 160A 200A

Hypertherm 45A 65A 85A 105A 125A 200A

Cutting thickness

According to the plasma power source 

Height regulating device

Arc voltage height

Cutting speed

0-10000mm/min

Cutting precision

±0.3mm

Control ccuracy

±0.01mm

Support software

Fastcam /Type3/autocad/pro/CAXA etc.

Working Temperature

-5~60°CRelative Humidity, 0-95%.

Power Supply Voltage

380V±20%(220V optional,but we need custom for you)

Packing Weight

3900x2300x1750mm

Packing Size

1500kg


cnc plasma cutter





Plasma Cutting Machine

Plasma Cutting Machine,Cnc Plasma Cutting Machine,Plasma Flame Cutting Machine,Plasma Cutter

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com