Ghl-300 Press Tablet Granules Granulator

Principle
The GHL super granulator can connect with FG fluid bed dryer to get the total line to make the press tablet granules.
Ghl-300 Press Tablet Granules Granulator is equipped with a closed container with blending tools driven from above or below has long been applied by the pharmaceutical industry. The mechanical effect of the blending tools - irrespective of whether in batches or continuous operation - creates a denser granulate than the fluidized bed process.
Originally, the granulation liquid was poured into the product. Today, an improved dosed distribution using a spray nozzle is preferred in order to obtain a more even granulate.
The granules are distinguished by a compact structure and high bulk density. They have good flow characteristics and can be optimally pressed. For various applications in pharmaceuticals and related industries.

Feature
1. Low noise and good seal
2. Enclosed structure, without overflow of power dust
3. Smooth running, reliable performance, easy operation.
4. Small cubage, easy to install, convenient to operate and maintain.
5. Compared with the traditional process,25%) of adhesive can be reduced and the drying time can be shorted;
6. The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes. Compared with the traditional process, 4-5 times of efficiency is raised;
7. In the same sealed container, dry mixing, humidity mixing and granulating can be finished, it is in conformity with the requirements of GMP;
8. The whole operation has strict safe and protective measures.
9. The mixing and cutting speed are controlled through frequency change, so the granules are more even.
10. Highly polished inner and outer surfaces of the barrel, no dead comer, easy to discharge materials, easy to clear, no cross contamination. Confining to the requirement of GMP.
11. Control system has more choices, such as push button , HMI+PLC and so on.
12. Machine materials : AISISUS304 , AISISUS316L, and other material .
13.  For the electrical component , we mainly use international brand such as ABB ,Siemens or Schneider.

Application
It's widely used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed materials can reach the best effect.
Attention to order
1. When order the GHL Series Super Mixing Granulator , Client need to supply the materials name
2. When order the GHL Series Super Mixing Granulator, Client need to supply the density of materials.
3. When order the GHL Series Super Mixing Granulator, Client need to supply the capacity per batch or capacity per hour.
4. When order the GHL Series Super Mixing Granulator, Client need to decide which kinds steel for machine-304 stainless steel or 316L stainless steel.
5. Other special requirements.      
       

 

metal tube and plate fiber laser cutting machine is a dual use fiber laser cutting machine can cut not only metal plates, but also metal tubes and pipes. This design can help save your workshop space and also save labor cost and also greatly improve productivity. This metal plate size cut by Fiber Laser Cutting Machine can be customized, the hot sale model is 1530 and 1325 working area for metal plate and 6m metal tube diameter 20-200mm, can customize to max 300mm.

Why to choose the fiber laser cutting machine?

1. High cutting accuracy: The positioning accuracy of the Metal Laser Cutter reaches 0.05 mm, and the repeated positioning accuracy reaches 0.03 mm.
2. Narrow slit: The width of the slit is generally 0.10-0.20 mm.
3. Smooth cutting surface: There is no burr on the cutting surface, and the roughness of the cut surface is generally controlled within Ra 6.5.
4. Fast cutting speed: the cutting speed can reach 10 m / min, and the maximum positioning speed can reach 30 m / min.
5. Good cutting quality: Adopting non-contact cutting, the cutting edge is affected by heat little, there is basically no thermal deformation of the work piece, to ensure that the work piece is not scratched, and the slitting generally does not require secondary processing.
6. Laser processing has good flexibility: the fiber laser cutting machine can process arbitrary graphics, and it can cut pipes and other profiles without being affected by the shape of the work piece.

Tube And Plate Fiber Laser Cutting Machine

metal tube and plate fiber laser cutting machine, sheet & tube fiber laser cutting machine, fiber laser cutting machine tube and plate, tube and plate cnc fiber laser cutting machine, 3015 fiber laser cutting machine, fiber laser cutting machine metal

Jinan Transon Cnc Equipment Co., Ltd. , https://www.csjiguang.com