Ghl-300 Press Tablet Granules Granulator

Principle
The GHL super granulator can connect with FG fluid bed dryer to get the total line to make the press tablet granules.
Ghl-300 Press Tablet Granules Granulator is equipped with a closed container with blending tools driven from above or below has long been applied by the pharmaceutical industry. The mechanical effect of the blending tools - irrespective of whether in batches or continuous operation - creates a denser granulate than the fluidized bed process.
Originally, the granulation liquid was poured into the product. Today, an improved dosed distribution using a spray nozzle is preferred in order to obtain a more even granulate.
The granules are distinguished by a compact structure and high bulk density. They have good flow characteristics and can be optimally pressed. For various applications in pharmaceuticals and related industries.

Feature
1. Low noise and good seal
2. Enclosed structure, without overflow of power dust
3. Smooth running, reliable performance, easy operation.
4. Small cubage, easy to install, convenient to operate and maintain.
5. Compared with the traditional process,25%) of adhesive can be reduced and the drying time can be shorted;
6. The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes. Compared with the traditional process, 4-5 times of efficiency is raised;
7. In the same sealed container, dry mixing, humidity mixing and granulating can be finished, it is in conformity with the requirements of GMP;
8. The whole operation has strict safe and protective measures.
9. The mixing and cutting speed are controlled through frequency change, so the granules are more even.
10. Highly polished inner and outer surfaces of the barrel, no dead comer, easy to discharge materials, easy to clear, no cross contamination. Confining to the requirement of GMP.
11. Control system has more choices, such as push button , HMI+PLC and so on.
12. Machine materials : AISISUS304 , AISISUS316L, and other material .
13.  For the electrical component , we mainly use international brand such as ABB ,Siemens or Schneider.

Application
It's widely used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed materials can reach the best effect.
Attention to order
1. When order the GHL Series Super Mixing Granulator , Client need to supply the materials name
2. When order the GHL Series Super Mixing Granulator, Client need to supply the density of materials.
3. When order the GHL Series Super Mixing Granulator, Client need to supply the capacity per batch or capacity per hour.
4. When order the GHL Series Super Mixing Granulator, Client need to decide which kinds steel for machine-304 stainless steel or 316L stainless steel.
5. Other special requirements.      
       

 

Transon auto feeding CO2 laser cutting machine is standard with auto feed worktable and auto feed frame, support engrave cut material in rolls like fabric, leather, paper, etc. The auto frame and worktable both with motor, make sure auto feed easy. We have standard 3 size auto feed laser cutting machine for choice, 1600x1000mm, 1600x2000mm, 1600x3000mm, the machine size can also be customized. 

Transon auto feed laser cutting machine with China top Reci brand laser tubes and CW3000, CW5200 water chillers for choice, can meet the most cut work of roll material.  

We do not suggest use this CO2 Laser Cutter Engraver to engrave cut heavy material like wood, MDF, as it may hurt the auto feed worktable make it can't auto feed successfully.

Auto Feed Fabric Laser Cutter

laser cutting machine for fabric,laser cutter fabric engraving,laser cutting machine leather,1610 laser cutting machine

Jinan Transon Cnc Equipment Co., Ltd. , https://www.csjiguang.com