China-Hopper-Loader-Pet-Dehumidifying-ABS-Drying-PP-Dehumidifier

 

STANDARD CONFIGRAUTION
♦ Integration of dehumidification, drying and conveying functions
♦ Dehumidification, drying and conveying integrated unit are equipped with honeycomb rotor for getting low dew-point dry air with good stability. Cut-off valve in semi-open and fully-enclosed feed system are equipped to assure no remnants materials left in material pipe.
♦ Equipped with micro computer and photosensor hopper for optical machine for micro powder cleaning, avoiding spot in optical products.
♦ Stainless steel mirror polishing of all material contact surface and closed loop feeding system to avoid the material get contaminate or damp
♦ High-performance filter to filter dusts down to 0.3um and the filtration rate can reach 99.995%;
♦ Bottom blowpipe design of material barrel with cyclone exhaust device for thermal drying barrel, to keep temperature and improvedrying efficiency;
♦ Double cooler structure to assure lower return air and dew-point.

 

WHAT IS" HONEY-COMB "?

WORKING PRINCIPLE

Dehumidification and drying: The hot and humid air from drying material barrel is blown into honeycomb rotor
after cooling. The water in air is absorbed by rotor and then desorbed by the regeneration heating air. The two
airflows workon the rotor at the same time, and as the rotor rotates, the water in air can be absorbed and desorbed continuously. Thus,a stable low dew-point air is formed and then blown into the drying barrel after heated to the
drying temperature of plastic, forming a closed loop to dry material.

Material suction: material suction is to suck material from material barrel or other material container into drying
material barrel. The motor starts to run when the magnetic reed switch of the vacuum hopper detects no material,
generatingvacuum in vacuum hopper, and then the material in material barrel will be sucked into vacuum hopper
because of the pressure difference of air. The motor stops working after sucking and the material will drop into
drying barrel. At last the dried material will be sucked into SVH hopper or other hopper which is set in plastic
moulding machine.

SPECIFICATION


DRYING CAPACITY



COMPANY VIEW



CERTIFICATION  


 EXHIBITION





 

Model		No.of Wheels	Length of handle adjusting(mm)	Overall Size:(Length *Width*Height)	Capacity (Ton)	N.W. (KG/PG)
X4+Y4	X4	4	800	230*230*110	8	31
	Y4	4	300-1000	170*140*110
X8+Y8	X8	8	1100	560*420*110	16	76
	Y8	8	400-1300	200*200*110
X12+Y12	X12	12	1100	750*450*110	24	106
	Y12	12	400-1400	256*200*110
X16+Y16	X16	16	1100	936*500*110	32	132
	Y16	16	400-1500	310*220*110
X18+Y18	X18	18	1500	780*500*110	36	148
	Y18	18	400-1500	300*250*110
X24+Y24	X24	24	1500	1000*580*120	48	200
	Y24	24	400-1600	360*315*120
X32+Y32	X32	32	1500	1080*720*140	64	312
	Y32	32	500-1200	460*315*10

FAQ

-When will I contact you?

-We are online 24 hours a day.

 

-How can I contact you?

-You can contact me on Alibaba or WHATSAPP  +8613930810918

 

-What advantage we have?

-Provide factory direct price will save your cost than buy from third party.

 

-How to place an order?

-Tell us your detail requirements (Load capacity, lifting height etc) by Email or on Trademanager or WHATSAPP. We will send your our offer in 24 hours. Please send us your purchase order or you can ask us to send you a proforma invoice for your order.

 

-Can you add our own logo on the products or use our designs?

-Yes, of course. You can add logo on our products! We provide OEM/ODM service. In addation, we promise your design would protect by law, we won't tell anyone else about this, It's your own copyright.