Ship Yokohama Floating Pneumatic Rubber Fender

Model NO.: Yokohama
Length: 1-12m
Part: Pressure Guage and Spanner
Certificate: CCS BV ABS Gl SGS
Trademark: Aohai
Transport Package: According to Customer Request
Specification: see attached
Origin: China
HS Code: 40169400
1.Product description:
Pneumatic rubber fenders are used in the various applications,such as ship-to-ship operations, ports and terminals and have proven its quality and performance.Our products are designed to withstand the extreme environmental conditions and we are committed to contribute to the offshore industry by delivering the superior products.
(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Aohai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of Aohai pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.

(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of Aohai sea inflatable fender, its adaptability is much higher than other fender.
 
(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
 
Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.
(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
2.Specifications and Measures:
Ship Yokohama Floating Pneumatic Rubber Fender
3.Contact Information:
Ship Yokohama Floating Pneumatic Rubber Fender
4.Product Picture:

Ship Yokohama Floating Pneumatic Rubber Fender

Ship Yokohama Floating Pneumatic Rubber Fender



 

Inner Ring

Inner Ring,Needle Bearing Inner Ring,Bearing Inner Ring,Needle Roller Bearing Inner Ring

Changzhou Fangya bearing Co.,LTD , https://www.czfybearing.com