Nickel Alloy Forged Socket Welding Fitting Union A249 Uns N08904

  Product Type:
        
         Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,
        Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,
        Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
 
Size:
       
        1/2" to 4"(DN15~DN100)
 
Range(Wall Thickness):

        3000LB to 9000LB
        XS, Sch80, Sch160, XXS.
 
Standard:

        ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
 
Material:

        Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel, 
        Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.
 
+ SOCKET WELD FITTINGS

        A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

        To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.
Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.
SW Fittings are family of high pressure fittings are used in various industrial processes.
 
Types of Threaded Fittings by Class and Size Plugs and Bushings are not identified. They may be used up through Class 6000 NPS

+THREADED FITTINGS

        Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

Types of Threaded Fittings by Class and Size Plugs and Bushings are not identified. They may be used up through Class 6000  

"Jin Yuankang three alloy electroplating technology refers to the double plating covering three element alloy thin, of which three yuan alloy copper tin Zinc Alloy" refers to the "three element alloy and stainless steel similar appearance". The coefficient of resistance is 1.7 cm (RF-10 GHz), the conductivity of (106S/m) (RF-10 GHz), the contact resistance is less than 10m at cN 100, with the help of a number of micro active flux solderability. Jin Yuankang ternary alloy electroplating for high frequency connection, in a wide frequency range the maximum transfer rate requirements, in addition, the "Three Element Alloy Plating technology can make the RF devices in industrial gases, perspiration and other corrosion or scratch, keep good appearance, without the protection of the silver coating even in normal circumstances rapid oxidation. "Three alloy plating technology" combines the excellent electrical conductivity of silver and the corrosion resistance of the alloy with "three elements", and the thin coating of the alloy with the value of in the range of 10GHz does not affect the good conductivity of silver. "Three alloy plating technology" does not contain magnetic elements, "plating alloy technology of three yuan" to prevent surface oxidation and film, the use of the surface will not lose luster. The characteristics of three element alloy plating surface to prevent scratches, not sensitive to damage, but also to prevent the silver plated cold welding and assembling with good damage caused by non. Compared with the silver plating, the "three element alloy technology" in the assembly of the device is especially to reduce the loss caused by the collision.

Ternary Alloy Process

Ternary Alloy Process,Ternary Alloy Plating,Ternary Alloy Plating Part

Jin Yuan Kang Industry Co., Ltd. , http://www.jykplating.com