2. Rubbing and collision of steel parts such as bumpers and carriages of sprinklers with natural obstacles ( rocks, trees, or slopes ) on the roadside to achieve the purpose of forcibly parking out and reduce accident losses as much as possible.
3 , when the sprinkler truck uphill, the brake failure, should be reduced to the middle and low gear timely, and maintain enough power to drive uphill parking. If you need to stop on a half-slope, you should keep the low gear in the forward direction and tighten the hand brake. The occupant will promptly block the wheels with stones, padding and other objects. If there is a phenomenon of backsliding, the rear of the vehicle should face the hillside or the side of safety, and turn on the headlights and emergency signal lights to attract the attention of the front and rear vehicles.
4. If the brake on the downhill of the sprinkler fails to use the vehicle's own mechanism to control the vehicle speed, the driver should use natural obstacles, such as rocks and trees near the roadside, to cause resistance to the car. If you can't find a suitable terrain and objects can be used for a while, you can bring one side of the car body closer to the mountain side in an emergency, increase resistance with friction, and gradually reduce the speed.
5 , the sprinkler should step on the brake when there is no condition in the next long slope or steep slope. Both can test the braking performance, but also can be found in the brake failure to gain control of the time, also known as predictive braking.
Brief Introduction:
Rotary Kiln belongs to series of building equipment. It can be divided into cement kiln, metallurgy and chemical kiln, and lime kiln.
Cement Kiln is mainly used in calcining cement clinker, it has wet method and dry method. Metallurgy and chemical kiln is mainly used in iron firing, Cr, Ni oxidation firing. It is mainly used for Kaolin calcination in the refractory factory, clinker and aluminium hydroxides calcination in aluminium factory. In the chemical kiln, it is mainly used in chrome ore calcination, chrome powder calcination and so on. Lime kiln can be called Active Lime Kiln,is mainly used for active lime and light burning dolomite calcination in iron plant and ferroalloy plant.
Features:
1.The rotary kiln shell design fully take into consideration of the corner at shell flexible supporting to extend the lifetime of refractory bricks and castings.
2.Rotary Kiln adopt supporting roller bearing with big diameter and small ratio between length and diameter to improve the reliability.The bearing is automatic self-sligning bearing.
3.The better sealing effect of new type open gear hood sealing type.
4.The spring lamination overlying type lexible sealing, double layer spring lamination sealing increase the heat insulation layer to improve the reliability and lifetime.
5.Through precision measuring and infra-red scanning, the whole sintering process of rotary kiln can be monitored.
Technical Parameters:
| Specification(m) |
Φ2.8/2.5×44 |
Φ3.2×52 |
Φ3×48 |
Φ3.2×50 |
Φ3.2×50 |
Φ3.3×50 |
Φ3.5×54 |
||
| Capacity(T/d) | 300 | 600 | 700 | 1000 | 1200 | 1200 | 1500-1800 | ||
| Gradient(%) | 3.5 | 3.5 | 3.5 | 3.5 | 4 | 4 | 4 | ||
| Support number(Pc) | 3 | ||||||||
| Round form of block | mechanism |
mechanism orhydraulic |
mechanism orhydraulic |
hydraulic |
hydraulic |
hydraulic |
hydraulic |
||
| Tube Speed | Main Drive(r/min) | 0.445-2.22 | 0.676-3.38 | 0.676-3.38 | 0.36-3.57 | 0.4-4.07 | 0.36-3.57 | 0.39-3.9 | |
| assistance drive(r/h) | 4.75 | 9.36 | 9.36 | 6.5 | 6.5 | 5.61 | 7.66 | ||
| Main Drive | Power | Model | ZSN4-225-21 | Z2-101 | ZSN4-280-091B | ZSN4-280-091B | ZSN4-280-091B | ZSN4-280-11B | ZSN4-315-092 |
| Power(KW) | 55 | 100 | 160 | 160 | 160 | 190 | 220 | ||
| Adjust Scope(r/min) | -1500 | -1500 | -1500 | -1500 | -1500 | -1500 | -1000 | ||
| Rating Voltage(v) | 440 | ||||||||
| Reducer | Model | ZS145-1-I | ZS145-1-I | ZZS145-1-I | ZSY450-40-V | ZSY450-40-V | ZSY450-40-V | NZS995-28VIBL | |
| ratio of speed | 49.63 | 49.63 | 40 | 40 | 40 | 40 | 28 | ||
| Tachogenerator | Rating Power(KW) | 22 | |||||||
| Speed Range(r/min) | 0-2000 | ||||||||
| maximum voltage(V) | 110 | ||||||||
| Assistant Drive | Power | Model | Y122M-4 | Y160M-6 | Y160M-4B | Y160M-4B | Y160M-4B | Y160M-4B | Y200L1-6 |
| Power(KW) | 4 | 7.5 | 15 | 11 | 11 | 15 | 18.5 | ||
| Adjust Scope(r/min) | 1440 | 970 | 1460 | 1460 | 1460 | 1460 | 970 | ||
| Rating Voltage(V) |
380 |
||||||||
| Reducer | Model | ZL35-16 | ZL35-7-I | ZL35-7-I | ZSY160-31.5 | ZSY355-31.5 | ZSY160-31.5 | ZSY355 | |
| ratio of speed | 40.44 | 14 | 31.5 | 31.5 | 31.5 | 31.5 | 45 | ||
| Total weight(Not including firebrick)(T) | 177 | 213 | 213 | 280.6 | 280.6 | 317 | 341 | ||
Rotary Kiln
Mine Rotary Kiln,Coal Rotary Kiln,Rotary Kiln,Industrial Rotary Kiln,Sand Rotary Kiln
Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co.,Ltd. , http://www.zonedingmac.com