After the oil of the bulk feed truck has been used for a period of time, due to some of its own impurities caused by the operation of the machinery and external contamination, some of the parts that are operated will have worn out metal shavings, and When the parts are subjected to some corrosive effects, they form metal salts that eventually deteriorate the oil in the bulk feed carrier. Some drivers are usually busy when transporting goods, and the knowledge of this piece is not enough, then it is prone to oil deterioration and accelerated aging, resulting in deterioration of the oil of bulk feed carriers. Can not get a good lubrication performance, which will accelerate the vehicle parts of the various parts of the degree of wear. Therefore, every driver of a bulk feed carrier should have a better understanding of and knowledge about the proper use of vehicle oil, and he must also be able to change the oil.
1, after a long period of driving the bulk feed carrier, you can remove the oil, drop it and rub it in your hands. If there is some abnormal taste, then it proves that the oil has gone bad.
2. Take a few drops of the extracted oil to the litmus test paper, and then carefully observe some changes in the test paper. If the litmus paper has turned red, then you need to replace the oil. Now.
3. If the bulk feed truck is in use, there are obvious lubrication conditions or there are many bubbles, and the foam will not disappear so easily, it proves that the oil in the bulk feed truck is already With the incorporation of water, the vehicle's engine oil deteriorated.
Usually when driving a bulk feed carrier, it is also possible to determine whether the engine oil has deteriorated through the degree of oil consumption. If the oil is mixed with water or diesel, the degree of consumption of the oil will increase or decrease. The emergence of these problems proves that the oil of the bulk feed truck has deteriorated, and it is necessary to replace the new oil immediately. .
Bearing shell is a semi-cylinder surface of tegular shape. It is clearance fit to the shaft neck. Our company could produce bearing shells for all kinds of couplings, especially for Voith couplings.
Size & Material: as required
Design: our new design or same as old parts
Package: standard export packing or customized
Transportation: by truck, by plane, by ship
Advantages:
1) Superior quality guaranteed
2) Competitive and reasonable price
3) Long lasting and reliable working life time
4) Fast lead time
5) Able to produce according to specification with control
6) Packing according to specifications required
7) Positive client feedback in abroad and domestic markets
8) Professional manufacture and offer the best serve
Our Serve:
1) Experienced engineers answer all your questions
2) Customized design is available
3) Offer surveying and mapping at site
Coupling Bearing Shell,High Speed Coupling Bearing Shell,Low Noise Coupling Bearing Shell,Half Shell Coupling Bearing
Shenyang German Machine Hydraulic Transmission Machinery Co., Ltd. , http://www.hcouplingc.com