Common failure analysis of rain test chamber

The rain test chamber is suitable for external lighting and signaling devices and automotive lamp enclosure protection, and can provide various environments for realistic simulation of electronic products and their components that may be subjected to water spray and spray tests during transportation and use. In order to achieve the waterproof performance of various products.

Common fault analysis of rain test chamber :

1, the pendulum does not move

Check whether the parameter setting is correct, check whether the swing tube motor is normal, and whether the swing tube has returned to zero.

2, the turntable does not turn

Check whether the parameters are set correctly, check whether the turntable motor is working, and whether the turntable speed is set correctly.

3, do not spray water

Check if the water pressure is normal, check if the pump is working, check if the nozzle is blocked, and replace the blocked and deformed nozzles in time.

4, the water flow is too large

Manually adjust the standard flow rate of the flow meter