Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)

Posted on

Model NO.: WCS40 SFC40
Trademark: JLD/OEM after legal authorization
Origin: Zhejiang, China
HS Code: 8483109000
Model NO.: WCS40 SFC40
Trademark: JLD/OEM after legal authorization
Origin: Zhejiang, China
HS Code: 8483109000
Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)Product Description
Linear Shaft is the guiding effect of sliding bearing, which can make the products of linear motion.
The necessary conditions required by the linear motion system is: simple design, the best performance, low maintenance cost, using the selected durable material, high-frequency heat treatment, the accurate outside
diameter size, roundness, really straight and surface treatment, etc.
Linear Shaft  (Linear rod; Steel bar; Optical axis)
Product Name Factory directly supply steel axis 40mm shaft for cnc kits (WCS40 SFC40)
Model No. WCS40 SFC40
Material Carbon Steel
Hardness HRC60 ± 2
Hardened layer thickness

0.8mm-3mm
Length 0-6000mm (If you need above 6000mm,we can anti-connect for you)
Precision g6
Roughness Within 1.5μm
Straightness Not excess 1.5μm of 100mm (Rmax)
Other linear shaft type Solid shaft, hollow shaft, threaded shaft, stainless steel shaft
Other Material Bearing Steel GCr15, Carbon Steel 45#, SUS440C 
OEM & Customized We are Professional bearing manufactory in China, the bearing of High Quality can be OEM & Customized according to your requirement, such as for thread shaft or not, Reduced shaft diameter, Coaxial Holes Drilled and Tapped, Flats-Single or Multiple, Key Way, Snap ring Grooves, Radial Holes Drilled and Tapped, Chamfering, etc.

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)
JLD Linear Shaft Application: 
1. Solid shaft
Generally applicable to industrial robots, as a professional measuring instruments, medical equipment, precision machine tools, aircraft shaft, pneumatic mandrel movement part. 
2. Hollow shaft
With its weight to reduce equipment, simplify the structure of the advantages, you can then wear the internal measurement of wire, compressed air, can also add lubricants and hydraulic oil. 
3. Stainless steel shaft
It's generally suitable for use as a part of the measurement in the presence of chemicals such as chemicals, seawater and other
Substances. 
Special machining shafts are finely finished after heat treatment with hard chrome plating for all types of automation equipment. 


JLD Special Machining for Linear Shaft: 
1. For the Length 
We can offer linear shaft with diameterφ5mm-φ150mm. Maxium length up to 6000mm. 
When you are special requirements on length, we can meet your machining requirements with different length. 
When you request above 6000mm, we can anti-connect for you. 
2. For Special Processing
When you have special requirements on machining. Such as threading, coaxial holes drilled and tapped, radial holes drilled and tapped, reduced shaft diameter etc, we can machine for you, and these special machines are finished after heat treatment and hard chromic so that ensure the precision of product. 
Send us your detailed sketch or blue print for propmt quotation and action, you should be satisfied with our service. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)
 
 
About Us

Lishui City Jialida Bearing Co., Ltd. is a professional manufacturer of linear motion products since 2007. We specialized in producing linear guides, ball screws, linear shafts, linear motion slide units, linear bearings, rod ends bearings, cam follower bearings/Needle roller bearing, precision linear module with good quality and competitive price. For OEM service, the products can be Customized according to customers' needs for standard or non-standard bearings. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)

Our Services

Our Quality: 
Quality is the life. We use only the best quality material to ensure the standard of our product range is of the highest caliber. 
All products we sold out are strictly selected and tested by our QC department. 
Warranty: 
We provide one year warranty for all products. 
Payment: 
We accept payment via TT (Bank transfer), Paypal, Western Union, and Money Gram. 
We accept bank transfer for large orders. For small order, you'd better pay via Paypal, Western union or Money Gram
Shipping: 
We offer as many shipping options as possible, including DHL, UPS, TNT, FedEx and EMS, Airfreight and by Sea. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)
FAQ
1. Are you factory or trading company? 
We are factory with most competitive price and high quality. We are Alibaba Gold Supplier seller since 2011. 

2. Customized accepted? 
Yes, of course, such as the bearing brand of Japanese, USA, Sweden and so on are available. If that, please send us the drawing of the type with the picture will be most appreciated. 

3. Can I get some samples or more discounts? 
Yes, just to contact us and we are honored to offer samples to you for checking. 

4. How about the time of delivery? 
For the products in stock, it will be sent out in 1-3 days; Or it will be sent out 3-30 days according to the quantity. 

5. What's your products main line? 
Since 2007, we specialized in producing all kinds of linear shaft, linear bearing, flange bearing, ball screw, linear guide way, linear motion ball bearing, needle roller bearing, etc. 

6. How can I get a quotation? 
Normally, we will quote within 24 hours. If you are in urgent, please give a call or let us know in your email with the details. 
We need information bellow: 
1. The Model Number/ the detail drawing of non-standard bearing; 
2. Quantity; 
3. Material; 
4. Surface treatment; 
5. Any special packing or other requirements. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)Product Description
Linear Shaft is the guiding effect of sliding bearing, which can make the products of linear motion.
The necessary conditions required by the linear motion system is: simple design, the best performance, low maintenance cost, using the selected durable material, high-frequency heat treatment, the accurate outside
diameter size, roundness, really straight and surface treatment, etc.
Linear Shaft  (Linear rod; Steel bar; Optical axis)
Product Name Factory directly supply steel axis 40mm shaft for cnc kits (WCS40 SFC40)
Model No. WCS40 SFC40
Material Carbon Steel
Hardness HRC60 ± 2
Hardened layer thickness

0.8mm-3mm
Length 0-6000mm (If you need above 6000mm,we can anti-connect for you)
Precision g6
Roughness Within 1.5μm
Straightness Not excess 1.5μm of 100mm (Rmax)
Other linear shaft type Solid shaft, hollow shaft, threaded shaft, stainless steel shaft
Other Material Bearing Steel GCr15, Carbon Steel 45#, SUS440C 
OEM & Customized We are Professional bearing manufactory in China, the bearing of High Quality can be OEM & Customized according to your requirement, such as for thread shaft or not, Reduced shaft diameter, Coaxial Holes Drilled and Tapped, Flats-Single or Multiple, Key Way, Snap ring Grooves, Radial Holes Drilled and Tapped, Chamfering, etc.

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)
JLD Linear Shaft Application: 
1. Solid shaft
Generally applicable to industrial robots, as a professional measuring instruments, medical equipment, precision machine tools, aircraft shaft, pneumatic mandrel movement part. 
2. Hollow shaft
With its weight to reduce equipment, simplify the structure of the advantages, you can then wear the internal measurement of wire, compressed air, can also add lubricants and hydraulic oil. 
3. Stainless steel shaft
It's generally suitable for use as a part of the measurement in the presence of chemicals such as chemicals, seawater and other
Substances. 
Special machining shafts are finely finished after heat treatment with hard chrome plating for all types of automation equipment. 


JLD Special Machining for Linear Shaft: 
1. For the Length 
We can offer linear shaft with diameterφ5mm-φ150mm. Maxium length up to 6000mm. 
When you are special requirements on length, we can meet your machining requirements with different length. 
When you request above 6000mm, we can anti-connect for you. 
2. For Special Processing
When you have special requirements on machining. Such as threading, coaxial holes drilled and tapped, radial holes drilled and tapped, reduced shaft diameter etc, we can machine for you, and these special machines are finished after heat treatment and hard chromic so that ensure the precision of product. 
Send us your detailed sketch or blue print for propmt quotation and action, you should be satisfied with our service. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)
 
 
About Us

Lishui City Jialida Bearing Co., Ltd. is a professional manufacturer of linear motion products since 2007. We specialized in producing linear guides, ball screws, linear shafts, linear motion slide units, linear bearings, rod ends bearings, cam follower bearings/Needle roller bearing, precision linear module with good quality and competitive price. For OEM service, the products can be Customized according to customers' needs for standard or non-standard bearings. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)

Our Services

Our Quality: 
Quality is the life. We use only the best quality material to ensure the standard of our product range is of the highest caliber. 
All products we sold out are strictly selected and tested by our QC department. 
Warranty: 
We provide one year warranty for all products. 
Payment: 
We accept payment via TT (Bank transfer), Paypal, Western Union, and Money Gram. 
We accept bank transfer for large orders. For small order, you'd better pay via Paypal, Western union or Money Gram
Shipping: 
We offer as many shipping options as possible, including DHL, UPS, TNT, FedEx and EMS, Airfreight and by Sea. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)
FAQ
1. Are you factory or trading company? 
We are factory with most competitive price and high quality. We are Alibaba Gold Supplier seller since 2011. 

2. Customized accepted? 
Yes, of course, such as the bearing brand of Japanese, USA, Sweden and so on are available. If that, please send us the drawing of the type with the picture will be most appreciated. 

3. Can I get some samples or more discounts? 
Yes, just to contact us and we are honored to offer samples to you for checking. 

4. How about the time of delivery? 
For the products in stock, it will be sent out in 1-3 days; Or it will be sent out 3-30 days according to the quantity. 

5. What's your products main line? 
Since 2007, we specialized in producing all kinds of linear shaft, linear bearing, flange bearing, ball screw, linear guide way, linear motion ball bearing, needle roller bearing, etc. 

6. How can I get a quotation? 
Normally, we will quote within 24 hours. If you are in urgent, please give a call or let us know in your email with the details. 
We need information bellow: 
1. The Model Number/ the detail drawing of non-standard bearing; 
2. Quantity; 
3. Material; 
4. Surface treatment; 
5. Any special packing or other requirements. 

Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40)

IKIA Bicycle Horn

        We have many kinds of shapes horn, can be used on Children Bicycle , City Bicycle ect . Welcome OEM and ODM orders to production .We will supply a perfect service for after sales.


Details

Firstly , IKIA can supply :


1>. All kinds of bike horns, such as,
for children bike
for City Bike
for mountainer bike
for Racing Bike
etc.  
2>. All kinds of materials' Bicycle bells , Such as , Plastic, Steel , Aluminium alloy, Rubber, Copper etc.
3>. All kinds of packages , Such as , Bubble bag , Polybag ,Paper bag , Bubble bag with card , Polybag with card , Nylon bag, Then carton, Carton+woven bag etc.

Secondly, We can supply all kinds Preferential Tariff Certificate of Origin, Such as, FORM E, FORM F, FTA etc.

Thirdly, We have CE, ISO9001:2008.

Finally, Any OEM and ODM are acceptable and realizable

bicycle horn

Service:  

1. Small MOQ, usually sample is available.
2. Support OEM & ODM: We can print logo or customs package according to our client`s requirement.
3. Top quality: We have professional team to control the quality.
4. We work with DHL, UPS, FedEx, TNT and EMS for small order. For large order we can arrange shipment by air or by sea. 
5. Satisfactory service: We treat clients as friends and 24 hours customer service.

kid bike horn

Bicycle Horn

Bicycle Horn,Bike Plastic Horn,Bike Plastic Horn,Kids Bicycle Horn

Hebei YIJIASHUN Trading Co.,Ltd , https://www.ikiabicycle.com